Abstracts
Nickel-Cobalt-Copper (22 - 24 May)
Nickel: Critical to a Sustainable Future
Richard Matheson *Opening, Nickel Institute, Australia
Richard Matheson *Opening, Nickel Institute, Australia
Keys to a Successful Nickel Laterites HPAL Design and Operations: A First Hand Experience
Lourdes Valle *Keynote, Arafura Resources, Australia
Lourdes Valle *Keynote, Arafura Resources, Australia
Coupled Dissolution-Precipitation Processes During Chalcopyrite Heap Leaching
Eric O. Ansah, University of Melbourne, Australia
Eric O. Ansah, University of Melbourne, Australia
Introduction Of Acorga® CR60LT In The Democratic Republic Of The Congo: A New Additive To Mitigate Crud Formation In SX Operations
Aidar Argyn & Andrew Bekle, Solvay/Huayou, Kazakhstan/ Australia/DRC
Aidar Argyn & Andrew Bekle, Solvay/Huayou, Kazakhstan/ Australia/DRC
Hydrometallurgical Pilot Plants: What they should, can and cannot do
Mark Benz, MRB International Consulting, Canada
Mark Benz, MRB International Consulting, Canada
The Future of Nickel in a Transitioning World: Modelling the Global Nickel Supply Chain and its Nexus with the Energy System
Jessie Bradley, TU Delft, Netherlands
Jessie Bradley, TU Delft, Netherlands
The Potential to Toll Mill Congo Copper Cobalt Oxide Ore
Damian Connelly, METS Engineering, Australia
Damian Connelly, METS Engineering, Australia
Conversion Of Prony Resources’Goro Plant to Nickel Hydroxide Concentrate Production
Adrian Dickison, Beca, New Zealand/ Gabriel Bensimon, Prony Resources, New Caledonia
Deep Sea Polymetallic Nodules: Diversification of Supply
Chris Duhayon, Global Sea Mineral Resources, Canada
Chris Duhayon, Global Sea Mineral Resources, Canada
Synchrotron Analyses: Adding Value to Characterisation of Nickel and other Critical Energy-Metals in Mineral Ore and Mining Wastes
Jessica Hamilton, Australian Synchrotron, ANSTO, Australia
Jessica Hamilton, Australian Synchrotron, ANSTO, Australia
A Critical Assessment of Re-Processing the Cathode “Black Mass” from Spent Lithium-Ion Batteries
Bryn Harris, NMR360, Canada
Bryn Harris, NMR360, Canada
Plant Design Considerations for Large-Scale Filtration and Dry Stacking of Copper Tailings
Andrew Hawkey, Diemme Filtration/GR Engineering, Australia
Andrew Hawkey, Diemme Filtration/GR Engineering, Australia
Moisture Drainage & Seepage Analysis in Stockpiles
Enes Kaya & Corin Holmes, Jenike & Johanson, Australia/USA
Enes Kaya & Corin Holmes, Jenike & Johanson, Australia/USA
Process and Agitator Design for Industrial Crystallization Processes
Wolfgang Keller, EKATO, Germany
Wolfgang Keller, EKATO, Germany
Acid Recovery Using Recoflo Ion Exchange
Katerina Kryst, Eco-Tec, Canada
Katerina Kryst, Eco-Tec, Canada
A Sustainable Approach to Treating High Arsenic Concentrates Using the Toowong ProcessTM and the Glasslock ProcessTM
Lachlan MacDonald, Core Resources/ Dundee Sustainable Technologies, Australia
Lachlan MacDonald, Core Resources/ Dundee Sustainable Technologies, Australia
Design and Operation of Solvent Extraction Plants Using Two or More Extractant Systems
Murdoch Mackenzie & Graeme Miller, Consultant/Miller Metallurgical Services, Australia
Murdoch Mackenzie & Graeme Miller, Consultant/Miller Metallurgical Services, Australia
Benchmarking the HPAL Process
Mike Miller, Mike Miller Consultancy Services, Australia
Mike Miller, Mike Miller Consultancy Services, Australia
Implementation of Jetti’s Catalytic Technology at Pinto Valley Mine to Enable Leaching of Low-Grade Chalcopyrite
Nelson Mora, Jetti Resources/Pinto Valley Mining/Worley, USA/Australia
Nelson Mora, Jetti Resources/Pinto Valley Mining/Worley, USA/Australia
Advancements in Surface Modification for Severe Service Valve Trim
Evelyn Ng& Duncan Bews, Callidus Process Solutions/ Callidus Welding Solutions, Australia
Evelyn Ng& Duncan Bews, Callidus Process Solutions/ Callidus Welding Solutions, Australia
Extraction of Nickel and Cobalt from Different Resources Using Alkaline Glycine Solutions
Elsayed Oraby, Curtin University, Australia
Elsayed Oraby, Curtin University, Australia
Brazilian Nickel's Piaui Nickel Project - Sustainable Nickel and Cobalt for a Low Carbon Future
Anne Oxley, Brazilian Nickel, UK
Anne Oxley, Brazilian Nickel, UK
Changes in the Global Mineral Composition of Copper Concentrates
Carlos Risopatron, International Copper Study Group, Portugal
Carlos Risopatron, International Copper Study Group, Portugal
Recovery of Copper from a Process Waste Stream
Tomasz Safinsk, ANSTO/Newcrest Mining, Australia
Tomasz Safinsk, ANSTO/Newcrest Mining, Australia
Capitalizing on Experience in Advancing the Autoclave Industry through Diversification
Jansen Scheepers, Mogas, USA
Jansen Scheepers, Mogas, USA
Recovery Improvement in Treatment of Refractory Copper Ores Using Elevated Temperature Leaching- A Case of Konkola Copper Mines Zambia
Milton Simukoko & Trevor Chalwe, Konkola Copper Mines, Zambia
Milton Simukoko & Trevor Chalwe, Konkola Copper Mines, Zambia
Lewatit® Chelating and Solvent Impregnated Ion Exchange Resins for the Recovery and Refining of Battery Metals
Dirk Steinhilber, Lanxess, Germany
Dirk Steinhilber, Lanxess, Germany
Rising Demand Sets Challenges for Innovation in Nickel Sulphate Crystallisation
John Warner, Jord Proxa, Australia
Valve Evolution in Hydrometallurgy
Ross Waters, C. G. Industrial Specialties (CGIS), Canada
Ross Waters, C. G. Industrial Specialties (CGIS), Canada
The Tech Project – Path to Production
Boyd Willis, Queensland Pacific Metals, Australia
Boyd Willis, Queensland Pacific Metals, Australia
Digital Transformation using Simulation in a Project Life Cycle
Rob Winter, KWA Kenwalt, Australia
Rob Winter, KWA Kenwalt, Australia
Moving Bed Ion Exchange Desorption for Base Metals Processing
Volha Yahorava, CleanTeQ Water, Australia
Volha Yahorava, CleanTeQ Water, Australia
| Important Dates | |
| Sponsorship & Exhibition Prospectus | Now Available |
| Registration Opens | Now Open |
| Deadline for abstracts | 30 November |
| Deadline for papers | 28 February |
| Call for student volunteers | Now open |
| Pre-record submission | 15 April |
(c) ALTA Conference 2022